Here's another example, not as dramatic,
of creating a photo illustration out of photographs.
But in this case, this is also showing evidence
that you are fabricating the pieces in your device.
This particular image is a CAD image used by the researchers
to show their device showing the various fabrications,
and this is how they used it in their patent submission.
But this is done in CAD.
They also made a picture of their device,
but you really can't see very much
about their very sophisticated ability
to make the various layers.
And so what I did was I took that device
and separated it into the initial pieces
that they did fabricate.
I laid them out on a background and decided
to try to use these images showing the layering of how
the device is made.
So out of these images, I constructed
a photo illustration of those pieces using software.
But these are real images that you've just seen from before.
Here's another way of showing it, making it
somewhat three dimensional.
But basically, this is a photo illustration
of the layers of this device not only showing
how it works (with the right labeling of course),
but also showing that they did indeed fabricate the layers.